BBC micro:bit with Kitronik Inventor's Kit and Accessories

BBC micro:bit with Kitronik Inventor's Kit and Accessories

A BBC micro:bit with a Kitronik Inventors Kit for the BBC micro:bit, a 1M anti-tangle USB Cable, a Battery Cage and 2 x AAA Batteries. Your BBC micro:bit will come in one of 4 colour schemes, unfortunately, it is not possible to specify which colour.

The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments.

To get you off to a flying start, we have included an easy-to-follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. 

The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard it is easy to use these pins to connect additional components to the BBC micro:bit.

Inventors Kit Add-On Packs:

The Kitronik Inventors Kit offers a great introduction to the world of physical computing. Its 12 experiments showcase how code and electronics can combine to create real-world everyday practical solutions to situations and problems. But why stop there?

The three add-on packs for the inventors kit have been specifically devised to introduce you to additional useful aspects of practical physical computing.

• ZIP LEDs Add-On Pack for Kitronik Inventors Kit for micro:bit - Learn how to write code to take control of ZIP LEDs and to respond to input from components such as potentiometers and sensors.
• Noise Pack for Kitronik Inventor's Kit for the BBC micro:bit - Learn how to manipulate sound, build instruments, amplify your sounds, and how to shape your sounds with Filtering and EQ.
• Digital Logic Pack for Kitronik Inventor's Kit for the BBC micro:bit - Learn how logic gates work and how they can be used with the micro:bit.

Note:

• This Kit requires assembly.
• This product ships with a micro:bit. 
• No soldering is required.

Features:

• No soldering is required - build your first circuit in minutes!
• Make 10 experiments included in the provided step-by-step tutorial book.
• All parts are included to conduct the 10 experiments (listed below).
• Small Prototype Breadboard and Edge Connector Board are included for fast prototyping.

Contents:

• 1 x BBC micro:bit V2.
• 1 x Kitronik Inventors Kit for the BBC micro:bit.
  • 1 x Mounting Plate.
  • 1 x Potentiometer - Vertical Type (finger adjust) 100K.
  • 1 x Finger Adjust Spindle.
  • 2 x Plastic Spacer 10mm.
  • 1 x Sticky Fixer for Battery Pack.
  • 1 x Small Prototype Breadboard.
  • 1 x Terminal Connector.
  • 4 x Push Switch.
  • 1 x Motor.
  • 1 x Transistor.
  • 2 x Red 5mm LED.
  • 2 x Orange 5mm LED.
  • 2 x Yellow 5mm LED.
  • 2 x Green 5mm LED.
  • 1 x RGB 5mm LED.
  • 1 x Fan Blade.
  • 5 x 2.2KΩ Resistor.
  • 5 x 10KΩ Resistor.
  • 5 x 47Ω Resistor.
  • 1 x Edge Connector Breakout Board for BBC micro:bit.
  • 10 x Male to Male Jumper Wires.
  • 10 x Male to Female Jumper Wires.
  • 1 x 470uF Electrolytic Capacitor.
  • 1 x Piezo Element Buzzer.
  • 4 x Pan Head M3 Machine Screw.
  • Depending on which booklet version your Inventors Kit shipped with, you will have one of the two following components;
    • 1 x Miniature LDR. For booklet Versions pre V1.7.
    • 1 x Phototransistor. For booklet versions post V1.7.
• 1 x 1M Anti Tangle USB Cable.
• 1 x Battery Cage.
• 2 x AAA Batteries